Modern
industrial cleaning

PowerMaster

Gentle, powerful and low-waste cleaning

PowerMaster is a new blasting system that works with compressed air and water-soluble blasting media. If necessary, small amounts of water are additionally dosed and added.

The new cleaning process is based on an environmentally friendly and water-soluble granulate which is fed into a compressed air jet. Shortly before discharge, the granulate is wetted with water to increase the kinetic energy. Due to the soft granulate, metallic surfaces are not attacked and other surfaces are not or only very slightly attacked.

Compressed air consumption from 2 m³/min and 2-8bar pressure. Water consumption from 0.50 l/min. Granulate consumption depends on the intended use.

PowerMaster can also be used in an automated version.

PowerMaster procedure

PowerMaster Cleaning and coating of pipes (inner and outer surfaces), bars, strips, profiles and wires. The system operates cost-effectively in the low-pressure range between 3 and – depending on the system type – a maximum of 8 bar of compressed air, with a low water consumption of 0.5 to 2 litres per minute. The blasting speed can be in the subsonic or supersonic range, depending on the application.
When using the blasting media recommended by mycon, even polished stainless steel surfaces or light metal surfaces can be cleaned or decoated without visibly affecting the metal surfaces. Foils, paints, lacquers or resins, grease, bituminous layers or release agents on moulds can be removed gently, quickly and economically with PowerMaster. PowerMaster can also be used for cleaning and decoating plastic surfaces.

The Powermaster application possibilities

PowerMaster can be used for cleaning large surfaces with special nozzles up to 160 mm wide.
When cleaning lighter soiling, PowerMaster works with the addition of extremely gentle abrasives. Vehicles, vehicle rims, but also glass, plastics or building facades of any kind can be cleaned gently and intensively at high surface outputs.

PowerMaster Innovation

PowerMaster cleans, decoats and desizes in a powerful and low-waste process.The cost-effective system operates at low pressure between 3 and – depending on the type of system – a maximum of 8 bar compressed air at a low water consumption of 1 to 2 litres per minute. Depending on the application, the jet velocity can be in the subsonic or supersonic range.

When using the blasting abrasives recomended by mycon, even polished stainless steel surfaces or light metal surfaces ca be cleaned or decoated without visible impairment of the metal surfaces. Foils, paints, varnishes or resins, greases, bituminous layers or release agents on moulds can be removed getly, quickly and economically with PowerMaster. PowerMaster can also be used for plastic surfaces.

PowerMaster can be equiped with special nozzles up to 160 mm width for cleaning large surfaces.

When cleaning lighter soiling, PowerMaster works without the addition of abrasives. Vehicles, vehicle rims, but also glass, plastics or building facades of any kind can be gently cleaned at high surface rates.

Application examples

Special waste container before cleaning with PowerMaster

Special waste container after cleaning with PowerMaster

Cleaning a heavily soiled plastic mold with PowerMaster

Cleaning of the clinker facade after fire damage with PowerMaster

Removal of parking space markings using PowerMaster